Achterliek-Spannungsmesser

Technik + Trimm für Finn-Einsteiger + Fortgeschrittene
User avatar
GER-110
Site Admin
Posts: 185
Joined: 8. July 2005 01:40
Your Boat and Sail-Number: G
Location: Porta Westfalica

Achterliek-Spannungsmesser

Unread post by GER-110 »

von Hit Masts für 50 EUR zzgl. MWSt

siehe:

http://www.hit-masts.nl/forsale/forsale.html

User avatar
GER 110
Posts: 1976
Joined: 15. September 2005 16:38
Your Boat and Sail-Number: G
Location: Porta Westfalica

Unread post by GER 110 »

Mast rake

More technology is involved in the rake measurement. A tape is still used but a weight system seems to be more accurate.



With a tape, 6.77 metre would be an average rake. Using a cord of leach length where an electronic scale is attached at the end, boom is positioned on deck and the load is measured as 37 kg for an average measurement. This can go down to 32-33 kg as a minimum (by raking the mast aft).



In flat waters and light winds you can rake the mast more back and in choppy conditions more forward.

Post Reply